ug2001 - ug2007 document number: ds27009 rev. 5 - 3 1 of 4 www.diodes.com october 2010 ? diodes incorporated ug2001 - ug2007 not recommended for new design 2.0a ultra-fast glas s passivated rectifier features ? glass passivated die construction ? ultra-fast switching for high efficiency ? surge overload rating to 60a peak ? low reverse leakage current ? lead free finish, rohs compliant (note 4) mechanical data ? case: do-15 ? case material: molded plastic. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020d ? terminals: finish - tin. plated leads solderable per ? mil-std-202, method 208 ? polarity: cathode band ? marking: type number ? ordering information: see page 3 ? weight: 0.4 grams (approximate) maximum ratings @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitance load, derate current by 20%. characteristic symbol ug2001 ug2002 u g2003 ug2004 ug2005 ug2006 ug2007 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage (note 5) v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r ( rms ) 35 70 140 280 420 560 700 v average rectified output current @t a = 55 c (note 1) i o 2.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 60 a thermal characteristics characteristic symbol value unit typical thermal resistance junction to ambient r ja 50 c/w operating and storage temperature range t j, t stg -55 to +150 c electrical characteristics @t a = 25c unless otherwise specified characteristic symbol ug2001 ug2002 u g2003 ug2004 ug2005 ug2006 ug2007 unit forward voltage @ i f = 2.0a v f 1.0 1.3 1.7 v peak reverse current @ t a = 25 c at rated dc blocking voltage (note 5) @ t a = 100 c i r 5.0 100 a typical total capacitance (note 2) c t 30 15 pf reverse recovery time (note 3) t r r 50 75 ns notes: 1. valid provided that leads are maintained at am bient temperature at a distanc e of 9.5mm from the case. 2. measured at 1.0mhz and appl ied reverse voltage of 4.0v dc. 3. measured with i f = 0.5a, i r = 1.0a, i rr = 0.25a. see figure 5. 4. eu directive 2002/95/ec (rohs). all applicable rohs exempti ons applied. please visit our w ebsite at http://www.diodes.com/ products/lead_free.html. 5. short duration pulse test used to minimize self-heating effect.
ug2001 - ug2007 document number: ds27009 rev. 5 - 3 2 of 4 www.diodes.com october 2010 ? diodes incorporated ug2001 - ug2007 not recommended for new design 0 0.4 0.8 1.2 1.6 2.0 25 50 75 100 125 150 175 200 i, ave r a g e f o r wa r d r e c t i f ied c u r r e n t (a) (o) t , ambient temperature ( c) fig. 1 forward current derating curve a single phase half-wave 60hz resistive or inductive load 0.01 0.1 1.0 10 0.6 0.8 1.0 1.2 i, i n s t a n t a n e o u s f o r wa r d c u r r e n t (a) f v , instantaneous forward voltage (v) fig. 2 typical forward characteristics f 1.81.61.4 2.0 i , peak forward surge current (a) fsm 0 20 40 60 11 01 0 0 number of cycles at 60hz fig. 3 peak forward surge current 1 10 100 11 01 0 0 c , t o t al c a p a c i t an c e (p f ) t v , reverse voltage (v) fig. 4 typical total capacitance r t = 25 c f = 1.0mhz j ug2001 - ug2004 ug2005 (+) (-)
ug2001 - ug2007 document number: ds27009 rev. 5 - 3 3 of 4 www.diodes.com october 2010 ? diodes incorporated ug2001 - ug2007 not recommended for new design ordering information (note 6) part number case packaging ug2001-t do-15 4k/tape & reel, 13-inch ug2002-t do-15 4k/tape & reel, 13-inch ug2003-t do-15 4k/tape & reel, 13-inch UG2004-T do-15 4k/tape & reel, 13-inch ug2005-t do-15 4k/tape & reel, 13-inch ug2006-t do-15 4k/tape & reel, 13-inch ug2007-t do-15 4k/tape & reel, 13-inch notes: 6. for packaging details, go to our w ebsite at http://www.diodes .com/datasheets/ap02007.pdf. package outline dimensions do-15 dim min max a 25.40 ? b 5.50 7.62 c 0.686 0.889 d 2.60 3.60 all dimensions in mm
ug2001 - ug2007 document number: ds27009 rev. 5 - 3 4 of 4 www.diodes.com october 2010 ? diodes incorporated ug2001 - ug2007 not recommended for new design important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2010, diodes incorporated www.diodes.com
|
